The new reinforced 1:10 tyres are the last generation of tyres for 1:10 Touring model cars. They have an ultra lowed section to assure the maximum stability when the model car is coming round bends. Their special feature is the reinforce of nylon tread ply to avoid the increase of diameter due to the centrifugal force.
Available on rim: PMT
image
description
KRONOS PMT rim Available in the following versions:
AR10K26-010/P1
KRONOS "soft"
26 mm.
AR10K26-020/P1
KRONOS "medium-soft"
26 mm.
AR10K26-030/P1
KRONOS "medium-duro"
26 mm.
AR10K26-040/P1
KRONOS "hard"
26 mm.
AR10K26-R10/P1
KRONOS Rain "soft"
26 mm.
AR10K26-R20/P1
KRONOS Rain "medium"
26 mm.
KRONOS Available in the following versions:
AR10K26-010
KRONOS "soft"
26 mm.
AR10K26-020
KRONOS "medium-soft"
26 mm.
AR10K26-030
KRONOS "medium-hard"
26 mm.
AR10K26-040
KRONOS "hard"
26 mm.
AR10K26-R10
KRONOS Rain "soft"
26 mm.
AR10K26-R20
KRONOS Rain "medium"
26 mm.
SLICK Available in the following versions:
AR10026-010
SLICK "soft"
26 mm.
AR10026-020
SLICK "medium-soft"
26 mm.
AR10026-030
SLICK "medium-hard"
26 mm.
AR10026-040
SLICK "hard"
26 mm.
SLICK PMT rim Available in the following versions:
AR10026-010/P1
SLICK "soft"
26 mm.
AR10026-020/P1
SLICK "medium-soft"
26 mm.
AR10026-030/P1
SLICK "medium-hard"
26 mm.
AR10026-040/P1
SLICK "hard"
26 mm.
1:10 Spugna
PMT-Tyres ON-ROAD" FOAM TYRES 1:10
Foam
The 1:10 foam tyres are manufactured with the best materials so that they have a fantastic grip on the track and excellent wear properties. These tyres are supplied glued on nylon PMT rims and ready to use. They are available in various compounds. They have been tested on the track and different surfaces. The 1:10 foam tyres are unique for their quality and performances and they are very good in every condition from high traction to dusty road. These amazing feature does not required the driver to change the model car set-up regardless of the surface.
Supplied glued on PMT rims.
image
description
Front Available in the following versions:
AM11026-135/P2
Front 35 sh.
off-set 0 mm.
26 mm.
AM11026-137/P2
Front 37 sh.
off-set 0 mm.
26 mm.
AM11026-140/P2
Front 40 sh.
off-set 0 mm.
26 mm.
AM11026-142/P2
Front 42 sh.
off-set 0 mm.
26 mm.
AM11026-145/P2
Front 45 sh.
off-set 0 mm.
26 mm.
Rear Available in the following versions:
AM11030-235/P2
Rear 35 sh.
off-set 2 mm.
30 mm.
AM11030-237/P2
Rear 37 sh.
off-set 2 mm.
30 mm.
AM11030-240/P2
Rear 40 sh.
off-set 2 mm.
30 mm.
AM11030-242/P2
Rear 42 sh.
off-set 2 mm.
30 mm.
AM11030-245/P2
Rear 45 sh.
off-set 2 mm.
30 mm.
1:10
There are no translations available.
Pneumatici 1:10 PMT-Tyres Spugna - Gomma
Spugna
I pneumatici 1:10 foam sono realizzati in materiale di prima qualità che permette notevole trazione e tenuta in curva, nonchè notevole durata.
Vengono forniti incollati su cerchio PMT in nylon e realizzati in differenti tipi di mescola.
Testate su piste e piazzali con fondi diversi, si sono dimostrate ottime in qualunque condizione, dal gommato al polveroso,
permettendo al pilota di non dover stravolgere l'assetto dell'automodello.
Forniti incollati su cerchio PMT.
Gomma
I nuovi pneumatici 1:10 rinforzati costituiscono l'ultima generazione di pneumatici per modelli 1:10 Touring.
Essi hanno una sezione ultra-ribassata per assicurare la massima stabilità dell'automodello in curva.
Presentano come caratteristica un rinforzo di tela in nylon per limitare l'aumento di diametro dovuto alla forza centrifuga.
Disponibili su cerchi: PMT
1:8 Truggy
PMT-Tyres "TRUGGY" TYRES 1:8
Truggy PMT 1:8 "TRUGGY" rubber tyres make their debut! Realized with compounds containing components of most modern art of the industry, these NEW tyres offer best grip and max traction. These tyres are available complete with new moulded foam insert.
image
description
MATRIX MT Available in the following versions:
AB18TR1-010
MATRIX MT "extra-soft"
AB18TR1-020
MATRIX MT "soft"
AB18TR1-030
MATRIX MT "medium"
TRAPEX MT Available in the following versions:
AB18TR1-010
MATRIX MT "extra-soft"
AB18TR1-020
MATRIX MT "soft"
AB18TR1-030
MATRIX MT "medium"
LUBE MT Available in the following versions:
AB18TR3-010
LUBE MT "extra-soft"
AB18TR3-020
LUBE MT "soft"
AB18TR3-030
LUBE MT "medium"
ASTRO MT Available in the following versions:
AB18TR4-010
ASTRO MT "extra-soft"
AB18TR4-020
ASTRO MT "soft"
AB18TR4-030
ASTRO MT "medium"
1:8 Buggy
PMT-Tyres "BUGGY” TYRES 1:8
Buggy PMT 1:8 "BUGGY" rubber tyres make their debut ! Realized with compounds containing components of most modern art of the industry, these NEW PMT off-road tyres offer best grip and max. traction. The PMT off-road tyres are available complete, with new moulded foam insert.
Available in profiles for each type of track conditions.
image
description
MATRIX Available in the following versions:
glued on rim
AB18OF1-010/P1
MATRIX "extra-soft"
AB18OF1-020/P1
MATRIX "soft"
AB18OF1-030/P1
MATRIX "medium"
without rim
AB18OF1-010
MATRIX "extra-soft"
AB18OF1-020
MATRIX "soft"
AB18OF1-030
MATRIX "medium"
ACTION Available in the following versions:
glued on rim
AB18OF2-010/P1
ACTION "extra-soft"
AB18OF2-020/P1
ACTION "soft"
AB18OF2-030/P1
ACTION "medium"
without rim
AB18OF2-010
ACTION "extra-soft"
AB18OF2-020
ACTION "soft"
AB18OF2-030
ACTION "medium"
STARS Available in the following versions:
glued on rim
AB18OF2-010/P1
ACTION "extra-soft"
AB18OF2-020/P1
ACTION "soft"
AB18OF2-030/P1
ACTION "medium"
without rim
AB18OF2-010
ACTION "extra-soft"
AB18OF2-020
ACTION "soft"
AB18OF2-030
ACTION "medium"
CAPTOR Available in the following versions:
glued on rim
AB18OF2-010/P1
ACTION "extra-soft"
AB18OF2-020/P1
ACTION "soft"
AB18OF2-030/P1
ACTION "medium"
without rim
AB18OF2-010
ACTION "extra-soft"
AB18OF2-020
ACTION "soft"
AB18OF2-030
ACTION "medium"
MATRIX2 Available in the following versions:
glued on rim
AB18OF5-010/P1
MATRIX2 "extra-soft"
AB18OF5-020/P1
MATRIX2 "soft"
AB18OF5-030/P1
MATRIX2 "medium"
without rim
AB18OF5-010
MATRIX2 "extra-soft"
AB18OF5-020
MATRIX2 "soft"
AB18OF5-030
MATRIX2 "medium"
TRAPEX Available in the following versions:
glued on rim
AB18OF6-010/P1
TRAPEX "extra-soft"
AB18OF6-020/P1
TRAPEX "soft"
AB18OF6-030/P1
TRAPEX "medium"
without rim
AB18OF6-010
TRAPEX "extra-soft"
AB18OF6-020
TRAPEX "soft"
AB18OF6-030
TRAPEX "medium"
LUBE Available in the following versions:
AB18OF7-010
LUBE "extra-soft"
AB18OF7-020
LUBE "soft"
AB18OF7-030
LUBE "medum"
1:8 Rally Games
Pneumatici 1:8 Rally Games PMT-Tyres
Rally Games The reinforced 1:8 'Rally Games' tyres are the last generation of tyres for rally games model cars. They have a smaller section and a more rounded profile of the side to exalt the smoothness when the model car is coming round bends. Their special feature is the reinforce of nylon tread ply to avoid the increase of diameter due to the centrifugal force. Thei are available with different tread pattern in various compounds for dry or very wet tracks.
Available on PMT rims hexagonal socket 17 mm.
image
description
"RALLY GAMES" REINFORCED TYRES 1:8 GLUED ON RIM Available in the following versions:
RALLY06-005/17
RALLY06 "extra-soft"
17 mm.
RALLY06-010/17
RALLY06 "soft"
17 mm.
RALLY06-020/17
RALLY06 "medium-soft"
17 mm.
RALLY06-030/17
RALLY06"medium-hard"
17 mm.
RALLY06-100/17
RALLY06 "Soft" Rain - Not reinforced
17 mm.
RALLY06-200/17
RALLY06 "Soft" Rain - Reinforced
17 mm.
RALLY06-S03/17
RALLY06 "Extra Soft" Super Racing
17 mm.
RALLY06-S05/17
RALLY06 "Soft" Super Racing
17 mm.
RALLY06-S10/17
RALLY06 "Medium" Super Racing
17 mm.
RALLY06-S20/17
RALLY06 "Hard" Super Racing
17 mm.
1:8 Foam
PMT-Tyres "ON-ROAD" FOAM TYRES 1:8
On-Road Foam
The new 1:8 PMT tyres in sponge rubber were developed using the best raw materials available on the market. After one year of trials, during which our test drivers won several races, we were able to develop a compound with high performance and we also made a selection of the most suitable glues and glueing systems. The tyres cover the range of hardness from 30 to 45 shore, both front and rear, and are devided in two types of constructions: the standard classic with three rings that guarantees optimum grip and the multiring that gives higher corner speed and lower wear.
Available on rims: PMT for "KYOSHO" & "MUGEN"
image
description
Front standard on PMT rim ON PMT RIM for "KYOSHO" & "MUGEN" Available in the following versions:
AM18S36-130/PK
Front standard 30 sh.
AM18S36-132/PK
Front standard 32 sh.
AM18S36-135/PK
Front standard 35 sh.
AM18S36-137/PK
Front standard 37 sh.
AM18S36-140/PK
Front standard 40 sh.
AM18S36-142/PK
Front standard 42 sh.
AM18S36-145/PK
Front standard 45 sh.
Front standard on Serpent RIM ON ORIGINAL SERPENT RIM Available in the following versions:
AM18S36-130/SV
Front standard 30 sh.
AM18S36-132/SV
Front standard 32 sh.
AM18S36-135/SV
Front standard 35 sh.
AM18S36-137/SV
Front standard 37 sh.
AM18S36-140/SV
Front standard 40 sh.
AM18S36-142/SV
Front standard 42 sh.
AM18S36-145/SV
Front standard 45 sh.
Rear standard on PMT rim ON PMT RIM for "KYOSHO" & "MUGEN" Available in the following versions:
AM18S60-230/PK
Rear standard 30 sh.
AM18S60-232/PK
Rear standard 32 sh.
AM18S60-235/PK
Rear standard 35 sh.
AM18S60-237/PK
Rear standard 37 sh.
AM18S60-240/PK
Rear standard 40 sh.
AM18S60-242/PK
Rear standard 42 sh.
AM18S60-245/PK
Rear standard 45 sh.
Rear standard on Serpent RIM ON ORIGINAL SERPENT RIM Available in the following versions:
AM18S60-230/SV
Rear standard 30 sh.
AM18S60-232/SV
Rear standard 32 sh.
AM18S60-235/SV
Rear standard 35 sh.
AM18S60-237/SV
Rear standard 37 sh.
AM18S60-240/SV
Rear standard 40 sh.
AM18S60-242/SV
Rear standard 42 sh.
AM18S60-245/SV
Rear standard 45 sh.
1:6
"BUGGY” TYRES 1:6 "A" Profile
The 1:6 off-road tyres were developed taking advantage of the know-how of PMT, world leader for large scale. The compounds are made with last generation polymers and high quantities of silica that, as in passenger car tyres, offer good grip and low rolling resistance improving consequently the corner speed of the model car. The profile was studied using the latest 3D CAD/CAM systems which allow, through computer simulation, to study different service conditions of the tyres. They are available with two different compounds in order to facilitate the proper set up of the model car.
image
description
A
120 mm.
B
65 mm.
C
94 mm.
Available in the following versions:
AB16A65-020
Soft "A" profile
"020"
65 mm.
AB16A65-030
Medium "A" profile
"030"
65 mm.
AB16A65-040
Hard "A" profile
"040"
65 mm.
F1
F1 PMT-Tyres
Following the wave of enthusiasm, now there are the new tyres for 'FORMULA 1' model cars. These tyres are designed and made following the same criteria used for the construction of real tyres, according to EFRA Rules. The use of the latest generation compounds makes this a tyre of superior quality. The new F1 'EAGLE' rain tyre is made by a new compound which is fine treaded for the best performance and water clearance on wet tracks. We kept the 'V' design that has already given us a great result so that we get perfect adhesion with a maximum drainage. These tyres are also supplied glued on rim.
Anteriore
A
142 mm.
B
60 mm.
C
105 mm.
D
78 mm.
Diameter
60 mm.
Posteriore
A
142 mm.
B
78 mm.
C
105 mm.
D
78 mm.
Diameter
78 mm.
Assembly
Incollare i lembi dell'inserto in spugna in modo da formare un anello (si sconsiglia l'utilizzo di una colla cianoacrilata in questa fase). Inserire il cerchio nell'anello incollandolo. Calzare la gomma sul cerchio, facendo attenzione che i lembi interni si posizionino nelle gole del cerchio, far colare all'interno delle stesse il cianoacrilato PMT incollando ogni volta piccole zone vista la rapida presa.
image
description
Available in the following versions (COMPLETE OF INNER SPONGES):
F100731-F10
Front Soft F1- Tracks with dirty surface or low grip
"F10"
60 mm.
F100731-F20
Front Hard F1- Tracks with dirty surface or low grip
"F20"
60 mm.
F100731-H10
Front Soft F1- Tracks with a lot of grip
"H10"
60 mm.
F100731-300
Front Extra Soft F1 rain
"300"
60 mm.
Available in the following versions (COMPLETE OF INNER SPONGES):
F100732-F10
Rear Soft F1- Tracks with dirty surface or low grip
"F10"
78 mm.
F100732-F20
Rear Hard F1- Tracks with dirty surface or low grip
"F20"
78 mm.
F100732-H10
Rear Soft F1- Tracks with a lot of grip
"H10"
78 mm.
F100732-300
Rear Extra Soft F1 rain
"300"
78 mm.
Available in the following versions (COMPLETE OF INNER SPONGES)::
F1E1411-300
Front Extra Soft F1 EAGLE rain
"300"
60 mm.
Available in the following versions (COMPLETE OF INNER SPONGES):
F1E1412-300
Rear Extra Soft F1 EAGLE rain
"300"
78 mm.
1:5
1:5 PMT-Tyres
1:5 Tyres
image
description
A
120 mm.
B
65 mm.
C
94 mm.
Assembly
Available on PMT rims only.
Available in the following versions:
STRATUS-K05/P0
Extra soft "STRATUS"
"K05"
65 mm.
STRATUS-K10/P0
Soft "STRATUS"
"K10"
65 mm.
STRATUS-K20/P0
Medium "STRATUS"
"K20"
65 mm.
STRATUS-K30/P0
Hard "STRATUS"
"K30"
65 mm.
A
126 mm.
B
66 mm.
C
95 mm.
Assembly
Available on PMT rims only.
Available in the following versions:
A0EAGLE-200/P0
Available in the following versions:
"200"
65 mm.
A0EAGLE-300/P0
Extra soft Rain "EAGLE"
"300"
65 mm.
A
126 mm.
B
66 mm.
C
95 mm.
Assembly
Available on PMT rims only.
Available in the following versions:
SUPREME-F10/P0
Soft “SUPREME”- Tracks with dirty surface or low grip
"F10"
65 mm.
SUPREME-F20/P0
Hard “SUPREME”- Tracks with dirty surface or low grip
"F20"
65 mm.
SUPREME-H10/P0
Soft “SUPREME”- Tracks with a lot of grip
"H10"
65 mm.
SUPREME-H20/P0
Hard “SUPREME”- Tracks with a lot of grip
"H20"
65 mm.
SUPREME-300/P0
Rain "SUPREME"
1:8
1:8 PMT-Tyres
On-Road Foam - Rally Games - Buggy - Truggy
On-Road Foam The new 1:8 PMT tyres in sponge rubber were developed using the best raw materials available on the market. After one year of trials, during which our test drivers won several races, we were able to develop a compound with high performance and we also made a selection of the most suitable glues and glueing systems. The tyres cover the range of hardness from 30 to 45 shore, both front and rear, and are devided in two types of constructions: the standard classic with three rings that guarantees optimum grip and the multiring that gives higher corner speed and lower wear.
Available on rims: PMT for "KYOSHO" & "MUGEN"
Rally Games The reinforced 1:8 'Rally Games' tyres are the last generation of tyres for rally games model cars. They have a smaller section and a more rounded profile of the side to exalt the smoothness when the model car is coming round bends. Their special feature is the reinforce of nylon tread ply to avoid the increase of diameter due to the centrifugal force. Thei are available with different tread pattern in various compounds for dry or very wet tracks.
Available on PMT rims hexagonal socket 17 mm.
Buggy Debutto per i nuovi pneumatici PMT 1:8 "BUGGY" su CERCHIO! Realizzati con mescole contenenti polimeri di ultima generazione, offrono il miglior grip e la massima trazione. Vengono forniti completi di nuovo inserto in spugna stampato.
I profili disponibili ne consentono l'uso in ogni condizione.
Truggy PMT 1:8 "TRUGGY" rubber tyres make their debut! Realized with compounds containing components of most modern art of the industry, these NEW tyres offer best grip and max traction. These tyres are available complete with new moulded foam insert.